A Bar Bending Machine (BBM), also known as a rebar bender, is a construction machine that is used to bend and shape steel bars (also called reinforcing bars or rebars) used in reinforced concrete structures.
Here are some of the common names for Bar Bending Machines:
Automatic Bar Bending Machine
Electric Bar Bender
Manual Bar Bender
Rebar Bender Machine
Steel Bar Bender
Portable Bar Bending Machine
Hydraulic Bar Bending Machine
CNC Rebar Bender
Stirrup Bender Machine
Automatic Stirrup Bending Machine
Wire Bending Machine
Automatic Steel Bar Bender
Rebar Spiral Bending Machine
Steel Bar Spiral Bender
Reinforcement Bar Bending Machine
Industrial Bar Bender
These are some of the common names of Bar Bending
Machines used in the construction industry.
Here is a step-by-step
guide on how to use a Rebar Bending Machine, along with its parts names:
Safety Precautions: Before using the rebar bending machine, ensure that
you are wearing proper personal protective equipment (PPE) such as gloves,
safety glasses, and appropriate clothing. Also, make sure that the work area is
clean and free of any obstacles.
Set up: The rebar bending machine typically has a table that
supports the steel bars and a bending mechanism that includes a set of rollers
and a bending plate. The rollers and bending plate can be adjusted to bend the
rebar to the desired angle.
Adjusting the rollers and
bending plate: The
rollers and bending plate are the most important parts of the machine. The
rollers are used to hold the steel bar in place while the bending plate is used
to shape the steel bar. Depending on the size of the steel bar, the rollers and
bending plate need to be adjusted accordingly. Refer to the user manual for
specific instructions on how to adjust the rollers and bending plate.
Loading the steel bar: Once the rollers and bending plate are adjusted, place
the steel bar onto the rollers, ensuring that it is properly aligned with the
Bending the steel bar: Activate the machine using the controls located on the
machine's control panel. Typically, the machine will have buttons to adjust the
angle of the bend and to activate the bending mechanism. Once the machine is
activated, the bending mechanism will move, bending the steel bar to the
Removing the steel bar: Once the steel bar is bent to the desired angle,
carefully remove it from the rollers and bending plate. Be sure to handle the
steel bar with care to avoid injury.
Repeat the process: If you need to bend additional steel bars, repeat the
process by adjusting the rollers and bending plate, loading the steel bar, and
activating the bending mechanism.
Control Panel: The control panel is the part of the machine that houses
the controls used to operate the machine.
Rollers: The rollers are used to hold the steel bar in place
while it is being bent.
Bending Plate: The bending plate is used to shape the steel bar to the
Motor: The motor is responsible for powering the machine.
Gearbox: The gearbox is used to control the speed of the machine.
Foot Pedal: The foot pedal is used to activate the bending
Table: The table is the surface on which the steel bars are
placed while they are being bent
If you are Looking For bar bending Machine that is suitable for you, we
have it all. We have machines that can cut from 4mm to 32mm, 40mm Rebars.
Bar Bending Machines starts from 65,000 onwards.