011-424 309 09 | +91 981 003 4741
info@sctpl.in | sales@sctpl.in

Wire Mesh Welding Machine

Wire Mesh Welding Machine

Sona construction Technologies Pvt Ltd is introducing latest technology wire mesh welding machine with smaller wire gauges using pneumatic welding mechanism. The line wires will be fed into the welding main machine from coils and they will be stored in the line wire accumulator to reduce the resistance for the servo motor when generating the desired cross wire pitch size.

Our steel wire mesh welding machine is high technology to produce welded mesh for constructional purpose as with reinforcement concrete.

The machine can be tailor-made according to customer's inquiry, but within the scope of our design for better efficiency and performance of the machines.

We use two types of welding mechanisms: for smaller wire gauges, we use pneumatic welding system; for bigger wire gauges, we use hydraulic welding system.

Material Cold-rolled, cold-drawn uncoated, galvanized wire.
Max. Mesh Width 1,500 mm
Line Wire Spacing ≥25 mm , adjustable
Cross Wire Spacing ≥25 mm, steplessly adjustable
Cross Wire Diameter Φ2.5 â€" Φ3.0 mm (pre-cut)
Max. welding capacity Φ3.0 + Φ3.0 mm
Max. Welding Speed 40 â€" 60 strokes/min (cross wire no°/min)
Air consumption ≥0.6Mpa, 1.5m3/min
Cooling water consumption ≥0.2Mpa, 0.5m3/min
Number of Welding Transformers >18
Number of Electrodes 36
Power Supply Voltage 380 V / 50 Hz
Control Voltage DC24 V
Total installed power 18 Ã — 16 KVA
Short Circuit Voltage 4 - 8 V
Welding current controlling Transistor
  1. Welding system is designed for cold-rolled wire or cold-drawn uncoated, galvanized wire.
  2. Maximum welding speed 40 â€" 80 strokes per minute.
  3. Welding transformers are water cooled and a thermostat monitors over-heating.
  4. Change the line wire diameters without replacing straightening rolls.
  5. Straightening units for 36 line wires.

© Sona Construction Technologies Pvt. Ltd. All rights reserved
Design and Developed by HeavensTradeMART Pvt.Ltd