011-424 309 09 | +91 981 003 4741
info@sctpl.in | sales@sctpl.in

Two Head Bender Machine

Two Head Bender Machine

This machine adopts only up-bending way, it can produce rebar up to 2 meter square, it is different from the old machine downward bending way, the length bar for square is limited by the shaft from the ground. This machine can be cooperative with the straightening machine,can produce the coil rebar into needed bar, easily solve the problem that old model can only bend the straight bar.

The straightened and cutting bar will fall down to onto the shaft , and both end neat and smooth, it will be easy for the worker to take the bar and to bend, every 5 seconds as a working cycles, the efficiency is very high.

Model S2H42B
Input Power 8.1KW
Bender System 2.2 KW x 2
Feeding System 1.5 KW X 1
Power supply 380 V 3 Phase
Air Compressor 2.2 KW x 1
Bending Capacity D16 ~ D42
Angle of bending 415 V / 3 Phase
Bending Capacity 4 - 16 mm
Angle of Bending 0~±180° Bending forward direction/reverse direction
Working speed 4 Sec / 180° , 8RPM
Loading Speed of Feeding Table 5.5m / Min
Capacity of Feeding Table 13500 KG
The diameter spec. of principal axis bush φ25 φ60 φ80 φ100
Size(L×W×H) 11000 x 2100 x 1500 MM
Weight 6000 KG
  1. Central soft rebars lock.
  2. High strength rail for long life.
  3. Bending & Clamping unit to enhance precision.
  4. Heavy loading shift for the batch material.
  5. Large Storage capacity save more than 100 geomatric graphic.

© Sona Construction Technologies Pvt. Ltd. All rights reserved
Design and Developed by HeavensTradeMART Pvt.Ltd